Lubrication gears

Lubrication of open tooth systems

Optimal supply of tooth systems is ensured over very long periods using a lubricating gearwheel. The lubricating system provides a variable lubricant supply.

See mountings

Mode of operation

The lubricant passes through the axle and appropriate holes in the foam material. With just a low pressing pressure, the stored lubricant is released again. The PU foam used (open-cell) stores the lubricant and releases it again in very small dosing quantities. In this way, over lubrication is effectively prevented, as it is possible wear caused by a lack of lubrication.

Models

The lubricating gearwheels are available with both straight as well as sloping right/ sloping left teeth (module 2-30). From a width of 20mm, the lubricating gearwheel is comprised of several segments. Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.

Technical Data

Lubrication gear

Material
Polyurethane foam, open-celled
Operating temperature
-30 °C to +150 °C
Speed at the surface
max. 5 m/s
Density
240 kg/m³
Application
suitable for oil & grease
tempered model on request

Lubrication gears

straight
right rising
left rising

Module 2

Lubrication gear 20 mm

Width
20 mm
Art. no. straight
LAT-SZ-G-2
Art. no. right rising
LAT-SZ-R-2
Art. no. left rising
LAT-SZ-L-2
3D drawings

Module 3

Lubrication gear 30 mm

Width
30 mm
Art. no. straight
LAT-SZ-G-3
Art. no. right rising
LAT-SZ-R-3
Art. no. left rising
LAT-SZ-L-3
2D drawings 3D drawings

Module 4

Lubrication gear 40 mm

Width
40 mm
Art. no. straight
LAT-SZ-G-4
Art. no. right rising
LAT-SZ-R-4
Art. no. left rising
LAT-SZ-L-4
2D drawings 3D drawings

Module 5

Lubrication gear 50 mm

Width
50 mm
Art. no. straight
LAT-SZ-G-5
Art. no. right rising
LAT-SZ-R-5
Art. no. left rising
LAT-SZ-L-5
3D drawings

Module 6

Lubrication gear 60 mm

Width
60 mm
Art. no. straight
LAT-SZ-G-6
Art. no. right rising
LAT-SZ-R-6
Art. no. left rising
LAT-SZ-L-6
3D drawings

Module 8

Lubrication gear 80 mm

Width
80 mm
Art. no. straight
LAT-SZ-G-8
Art. no. right rising
LAT-SZ-R-8
Art. no. left rising
LAT-SZ-L-8
2D drawings 3D drawings

Module 10

Lubrication gear 100 mm

Width
100 mm
Art. no. straight
LAT-SZ-G-10
Art. no. right rising
LAT-SZ-R-10
Art. no. left rising
LAT-SZ-L-10
2D drawings 3D drawings

Axles

Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.

straight
angled

Straight axles

Straight axle 20 mm

Width
20 mm
Fixing of axle
M10
Thread hollow axle
M6
Art. no.
LAT-A-2
2D drawings 3D drawings

Straight axle 30 mm

Width
30 mm
Fixing of axle
M10
Thread hollow axle
M6
Art. no.
LAT-A-3
2D drawings 3D drawings

Straight axle 40 mm

Width
40 mm
Fixing of axle
M10
Thread hollow axle
M6
Art. no.
LAT-A-4
2D drawings 3D drawings

Straight axle 50 mm

Width
50 mm
Fixing of axle
M16
Thread hollow axle
M10x1
Art. no.
LAT-A-5
2D drawings 3D drawings

Straight axle 60 mm

Width
60 mm
Fixing of axle
M16
Thread hollow axle
M10x1
Art. no.
LAT-A-6
2D drawings 3D drawings

Straight axle 80 mm

Width
80 mm
Fixing of axle
M16
Thread hollow axle
M10x1
Art. no.
LAT-A-8
2D drawings 3D drawings

Straight axle 100 mm

Width
100 mm
Fixing of axle
M16
Thread hollow axle
M10x1
Art. no.
LAT-A-10
3D drawings

Angled axles

Angled axle 20 mm

Width
20 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-2G
2D drawings 3D drawings

Angled axle 30 mm

Width
30 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-3G
2D drawings 3D drawings

Angled axle 40 mm

Width
40 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-4G
2D drawings 3D drawings

Angled axle 50 mm

Width
50 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-5G
3D drawings

Angled axle 60 mm

Width
60 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-6G
2D drawings 3D drawings

Angled axle 80 mm

Width
80 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-8G
2D drawings 3D drawings

Angled axle 100 mm

Width
100 mm
Fixing of axle
M8
Thread hollow axle
M10x1
Art. no.
LAT-A-10G
3D drawings