Lubrication gears
Lubrication of open tooth systems
Optimal supply of tooth systems is ensured over very long periods using a lubricating gearwheel. The lubricating system provides a variable lubricant supply.
See mountingsMode of operation
The lubricant passes through the axle and appropriate holes in the foam material. With just a low pressing pressure, the stored lubricant is released again. The PU foam used (open-cell) stores the lubricant and releases it again in very small dosing quantities. In this way, over lubrication is effectively prevented, as it is possible wear caused by a lack of lubrication.
Models
The lubricating gearwheels are available with both straight as well as sloping right/ sloping left teeth (module 2-30). From a width of 20mm, the lubricating gearwheel is comprised of several segments. Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.
Technical Data
Lubrication gear
- Material
- Polyurethane foam, open-celled
- Operating temperature
- -30 °C to +150 °C
- Speed at the surface
- max. 5 m/s
- Density
- 240 kg/m³
- Application
- suitable for oil & grease
tempered model on request
Lubrication gears
Module 2
Lubrication gear 20 mm
- Width
- 20 mm
- Art. no. straight
- LAT-SZ-G-2
- Art. no. right rising
- LAT-SZ-R-2
- Art. no. left rising
- LAT-SZ-L-2
Module 3
Lubrication gear 30 mm
- Width
- 30 mm
- Art. no. straight
- LAT-SZ-G-3
- Art. no. right rising
- LAT-SZ-R-3
- Art. no. left rising
- LAT-SZ-L-3
Module 4
Lubrication gear 40 mm
- Width
- 40 mm
- Art. no. straight
- LAT-SZ-G-4
- Art. no. right rising
- LAT-SZ-R-4
- Art. no. left rising
- LAT-SZ-L-4
Module 5
Lubrication gear 50 mm
- Width
- 50 mm
- Art. no. straight
- LAT-SZ-G-5
- Art. no. right rising
- LAT-SZ-R-5
- Art. no. left rising
- LAT-SZ-L-5
Module 6
Lubrication gear 60 mm
- Width
- 60 mm
- Art. no. straight
- LAT-SZ-G-6
- Art. no. right rising
- LAT-SZ-R-6
- Art. no. left rising
- LAT-SZ-L-6
Module 8
Lubrication gear 80 mm
- Width
- 80 mm
- Art. no. straight
- LAT-SZ-G-8
- Art. no. right rising
- LAT-SZ-R-8
- Art. no. left rising
- LAT-SZ-L-8
Module 10
Lubrication gear 100 mm
- Width
- 100 mm
- Art. no. straight
- LAT-SZ-G-10
- Art. no. right rising
- LAT-SZ-R-10
- Art. no. left rising
- LAT-SZ-L-10
Axles
Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.
Straight axles
Straight axle 20 mm
- Width
- 20 mm
- Fixing of axle
- M10
- Thread hollow axle
- M6
- Art. no.
- LAT-A-2
Straight axle 30 mm
- Width
- 30 mm
- Fixing of axle
- M10
- Thread hollow axle
- M6
- Art. no.
- LAT-A-3
Straight axle 40 mm
- Width
- 40 mm
- Fixing of axle
- M10
- Thread hollow axle
- M6
- Art. no.
- LAT-A-4
Straight axle 50 mm
- Width
- 50 mm
- Fixing of axle
- M16
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-5
Straight axle 60 mm
- Width
- 60 mm
- Fixing of axle
- M16
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-6
Straight axle 80 mm
- Width
- 80 mm
- Fixing of axle
- M16
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-8
Straight axle 100 mm
- Width
- 100 mm
- Fixing of axle
- M16
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-10
Angled axles
Angled axle 20 mm
- Width
- 20 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-2G
Angled axle 30 mm
- Width
- 30 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-3G
Angled axle 40 mm
- Width
- 40 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-4G
Angled axle 60 mm
- Width
- 60 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-6G
Angled axle 80 mm
- Width
- 80 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-8G
Angled axle 100 mm
- Width
- 100 mm
- Fixing of axle
- M8
- Thread hollow axle
- M10x1
- Art. no.
- LAT-A-10G